BVZHJ - DAP 1012 GLAZING
- MSDS: BVZHJ
- Manufacturer: DAP INC
- Product Name: DAP 1012 GLAZING
- National Stock Number: 8030-00-823-7920
Product Identification
Product ID:DAP 1012 GLAZING
MSDS Date:01/07/1994
FSC:8030
NIIN:00-823-7920
MSDS Number: BVZHJ
Responsible Party
US
Emergency Phone: 800-535-5053; 800-543-3840
Info Phone: 800-543-3840
Cage: 90300
Contractor
Telephone: 513-253-7154/800-543-3840
Cage: 90300
Ingredients
MINERAL SPIRITS
CAS: 8052-41-3
RTECS: WJ8925000
Fraction By Weight: 1-5%
OSHA PEL 100 PPM
ACGIH TLV: 100 PPM
HYDROUS MAGNESIUM SILICATE
CAS: 14807-96-6
RTECS: WW2710000
48 GRAMS/LITER. VOC
RTECS: 9999999VO
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE EFFECTS: MAY IRRITATE EYES,
SKIN, NOSE & RESPIRATORY TRACT. HARMFUL IF INHALED. HARMFUL OR
FATAL IF SWALLOWED. IF INGESTED, THIS PRODUCT MAY CAUSE VOMITING,
DIARRHEA, & DEPRESSED RESPIRATION. IN HALATION MAY AFFECT THE BRAIN
OR NERVOUS SYSTEM CAUSING DIZZINESS, HEADACHE, OR NAUSEA.
Effects of Overexposure:CHRONIC EFFECTS: REPORTS HAVE ASSOCIATED
PERMANENT BRAIN & NERVOUS SYSTEM DAMAGE WITH PROLONGED AND REPEATED
OCCUPATIONAL OVEREXPOSURE TO SOLVENTS. PROLONGED OR REPEATED
CONTACT WITH SKIN MAY CAUSE IR RITATION.
First Aid
First Aid:EYE CONTACT: FLUSH WITH LARGE AMOUNTS OF WATER FOR 15
MINUTES. CONTACT A PHYSICIAN IMMEDIATELY. SKIN CONTACT: WASH WITH
SOAP AND WATER. INHALATION: REMOVE TO FRESH AIR. CONTACT A
PHYSICIAN IMMEDIATELY . INGESTION: DO NOT INDUCE VOMITING. CONTACT
A PHYSICIAN IMMEDIATELY.
Fire Fighting
Flash Point Method:CC
Flash Point:194F,90C
Extinguishing Media:FOAM, CARBON DIOXIDE, DRY CHEMICALS
* (MINERAL SPIRITS)
Fire Fighting Procedures:FULL PROTECTIVE EQUIPMENT, INCLUDING
SELF-CONTAINED BREATHING APPARATUS, IS RECOMMENDED TO PROTECT FROM
COMBUSTION PRODUCTS. COOL EXPOSED CONTAINERS WITH WATER.
Unusual Fire/Explosion Hazard:CONTAINER MAY EXPLODE W/EXTREME
HEAT.ELIMINATE IGNITION SOURCES:HEAT,ELECTRICAL EQUIP,SPARKS,& OPEN
FLAMES.DON'T PUT IN CONTACT W/OXIDIZERS OR CAUSTIC MATERIALS
Accidental Release
Spill Release Procedures:SCRAPE UP DRIED MATERIAL AND PLACE INTO
CONTAINERS.
Handling
Handling and Storage Precautions:STORE AWAY FROM CAUSTICS AND
OXIDIZERS. KEEP OUT OF REACH OF CHILDREN. KEEP CONTAINERS FROM
EXCESSIVE HEAT AND FREEZING.
Other Precautions:KEEP CONTAINERS TIGHTLY CLOSED WHEN NOT IN USE. DO
NOT STORE AT TEMPERATURES ABOVE 120F. INTENTIONAL MISUSE BY
DELIBERATELY CONCENTRATING AND INHALING VAPOR MAY BE HARMFUL OR
FATAL.
Exposure Controls
Respiratory Protection:IF 8 HOUR EXPOSURE LIMIT OR VALUE IS EXCEEDED
FOR ANY COMPONENT, USE AN APPROVED NIOSH/OSHA RESPIRATOR. CONSULT
YOUR SAFETY EQUIPMENT SUPPLIER AND THE OSHA REGULATION, 29 CFR
1910.134 FOR RESPIRATOR R EQUIREMENTS.
Ventilation:PROVED SUFFICIENT MECHANICAL VENT (LOCAL OR GENERAL
EXHAUST) TO MAINTAIN EXPOSURE BELOW PEL/TLV. *
Protective Gloves:IMPERVIOUS GLOVES RECOMMENDED
Eye Protection:SAFETY GLASSES ARE RECOMMENDED
Other Protective Equipment:PROVIDE EYEWASH AND SOLVENT IMPERVIOUS APRON
IF BODY CONTACT WITH PRODUCT MAY OCCUR. BARRIER CREAMS MAY BE USED.
Work Hygienic Practices:WASH CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
* VAPORS ARE HEAVIER THAN AIR AND WILL COLLECT IN LOW AREAS. CHECK ALL
LOW AREAS (BASEMENTS, SUMPS, ETC) FOR VAPOR BEFORE ENTERING.
Chemical Properties
Boiling Pt:B.P. Text:>325F,>163C
Vapor Pres:3.1 *
Vapor Density:> 1
Spec Gravity:2.2 (WATER=1)
Evaporation Rate & Reference:<1 (BU AC=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:COLORED PASTE WITH A MILD ODOR
Percent Volatiles by Volume:1-5
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS AND CAUSTICS
Stability Condition to Avoid:EXCESSIVE HEAT
Hazardous Decomposition Products:NORMAL COMBUSTION PRODUCTS, I.E., COX,
NOX
Conditions to Avoid Polymerization:EXCESSIVE HEAT.
Disposal
Waste Disposal Methods:DISPOSE OF ACCORDING TO FEDERAL, STATE, AND
LOCAL REGULATIONS. DO NOT REUSE EMPTY CONTAINERS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.